3CX Phone System Large SBC for up to 50 phones/250 BLF, 16-64 Calls

3CX Phone System Large SBC for up to 50 phones/250 BLF, 16-64 Calls

$519.00

Login or Create an account to see discounted pricing

Usually ships in 3 – 4 business days

SKU: 3CXSBCLARGE Category:

Description

  • Compatible with 3CX Phone System 14 with a maximum of 50 SIP and/or 250 BLF registrations (50 phones with 5 BLF keys each)
  • Fully assembled Intel NUC with Core i3 (7th gen), 8GB DDR RAM, 128GB SSD
  • OS installed & custom tuned by FS Comm – Advanced Certified 3CX Gold Partner
  • Can be bundled with an optional 3CX Phone System Annual License (16 – 64 Simultaneous Calls)
  • Fully Plug-n-Play if 3CX Server FQDN & Tunnel Password are provided during purchase (use the order notes section at checkout)

Plug-n-Play

If you provide your 3CX Server FQDN & Tunnel Password during purchase, we will install/configure the 3CX SBC service for a fully configured, drop-in, plug-n-play, SBC device.

Introduction

The 3CX SBC is deployed to remote offices where there are more than 2 or 3 IP Phones, to direct only their signaling through the 3CX Tunnel and keep the media streams local which reduces the amount of internet bandwidth that local calls between phones use. SBC will bundle all SIP traffic over a single TCP port which simplifies your deployment by reducing firewall configuration. In addition 3CX SBC will add stability & security and allow you to easily manage and provision your IP Phones remotely.

Device Details

  • Minimal OS
  • DHCP (default)
  • Non-essential components disabled
  • Latest OS updates installed
  • Customized boot/localization
  • Automated service monitoring via monit
  • Accessible via SSH or console using username/password: admin/admin

Manual Setup Instructions

  1. Connect SBC to LAN, power, monitor, and keyboard & power on device
  2. After SBC device boots, login to SBC device console (pi/raspberry)
  3. Optionally make any OS/device changes desired (network, time zone, etc.)
  4. To begin the SBC configuration, enter “sudo ~pi/install-sbc”
  5. Follow “Step 2” from the “Installing 3CX SBC (Session Border Controller) for Raspberry Pi or Debian 8 amd64” on the 3CX website
  6. Run “sudo reboot” to reboot